Free tool

Pool service cost calculator

Published US planning ranges are available by job type. A licensed pro will give an actual quote after discussion and assessment.

(858) 400-4404 Request a quote

Maintenance tools on concrete by the pool, including a net, brush, test kit, and wrenches

Planning ranges

Job type

Planning context only. These are general US published figures, not Splash Pool SD or operator rates. An actual quote follows discussion and assessment. This tool is free to use. It does not make a service visit free.

Pick a job type to view the published range, what it covers, and questions to bring to a quote.

Published planning range

$80 to $150 per month

Monthly cleaning (weekly or every-other-week visits)

Scope: Cleaning on a weekly or bi-weekly schedule, priced per month rather than per visit.
Source: HomeGuide, pool maintenance cost

Questions for your quote:

Weekly or bi-weekly visits, and for which months
What the monthly price covers versus extra billings
Who supplies chemicals and what gets excluded
Sanitizer type, automation level, and current water condition
Access, pets, and any equipment already failing

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Published planning range

$200 to $400

One-time cleaning

Scope: Specific or one-time cleaning that varies with pool size and type of cleaning, not a guaranteed green-pool or chemistry-only price.
Source: HomeGuide, pool maintenance cost

Questions for your quote:

What cleaning you need, in plain terms (debris, walls, filter, water appearance)
Approximate size and how long the pool has sat
Whether filter cleaning and chemistry work are included or excluded from the visit
Access and any equipment that must remain off

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Published planning range

$50 to $650

Pump repair

Scope: Average total cost for pump repair, not a new-pump price or a diagnosis of the failed part.
Source: HomeGuide, pool repair cost

Questions for your quote:

What the pump is doing now (no prime, noise, no power, leaking)
Brand, model, and whether single-speed or variable-speed
Whether a same-size replacement would be acceptable if repair is not practical
Any plumbing or electrical changes the pad already needs

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

$150 to $750

Heater repair

Scope: Average total cost for heater repair, not a new heater install or a diagnosis of the failed part.
Source: HomeGuide, pool repair cost

Questions for your quote:

Heater type (natural gas, propane, or heat pump) and the symptoms
Brand and model if you can read them
Whether it fails to start, heat, or hold temperature
Last service date, if known

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

$250 to $1,700

Filter replacement

Scope: Average total cost for filter replacement; sand, cartridge, and DE are different products, and this is not a parts-only unit price.
Source: HomeGuide, pool repair cost

Questions for your quote:

Current filter type: sand, cartridge, or DE
Tank size or model number
Why you think it needs replacement
If the current pad and plumbing will remain as they are

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

Between $6 and $8 per square foot

Plaster resurfacing

Scope: Plaster/marcite resurfacing only, per square foot of interior finish area (floor, walls, and steps), not gallons or deck footprint; the published range excludes refill, and the pool is drained and cleaned to prep for the new finish.
Source: HomeGuide, pool resurfacing cost

Questions for your quote:

Measured interior finish area in square feet, not gallons
What finish you have now, plus any cracking, staining, or delamination you notice
Is waterline tile or coping part of your quote?
Is drain, clean/prep, new plaster, and refill part of your quote?

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

Between $7 and $15 per square foot

Pebble resurfacing

Scope: Pebble resurfacing only, measured by square foot of interior finish area, not gallons or deck footprint; refill is not included in the published range, and the pool gets drained and cleaned to prep for the new finish.
Source: HomeGuide, pool resurfacing cost

Questions for your quote:

Measured interior finish area in square feet, not gallons
Describe the current finish condition using your own words
Any preferred pebble color or product
Is tile, coping, and refill part of your quote?

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

$100 to $1,000

Leak detection only

Scope: Professional leak detection on average that varies with pool type, liner, method, and leak source, sometimes including minor leak patching, not a full leak-repair quote, a credit toward later work, or extensive pipe or structural work.
Source: HomeGuide, pool leak detection cost

Questions for your quote:

In-ground or aboveground, and liner or plaster finish
Signs you are seeing (water loss, wet soil, air in the pump)
Detection alone, or detection plus a repair quote once the leak is found
What does the detection cover, what are the test limitations, and can you provide a separate repair estimate?

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

$1,000 to $2,500

In-ground salt conversion

Scope: In-ground conversion planning estimate, not the aboveground figure or a salt-cell replacement price; existing pumps are often reused, salt systems generate chlorine from salt, and additional equipment or repair can raise the actual quote.
Source: Angi, saltwater pool conversion cost

Questions for your quote:

Confirm the pool is in-ground
Approximate gallons so the company can properly size the generator
State of the current pump and filter (replacement is extra)
Electrical supply at the pad and the spot where the cell would go
Whether a worn cell falls under this job or later maintenance

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

$1,500 to $4,500 installed

Installed gas or propane heater

Scope: Average installed cost for a natural gas or propane heater, not a heat-pump figure. Gas-line run, plumbing connection, electrical work, and heater size affect the company quote.
Source: HomeGuide, pool heater cost

Questions for your quote:

Natural gas or propane at the property, and distance to the pad
Whether a new gas line, a plumbing hookup, or a dedicated electrical circuit is needed
Your pool usage patterns, such as weekend-only versus holding a set temperature
Approximate volume and the target water temperature you prefer

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

Published planning range

$2,000 to $6,000 installed

Installed heat-pump heater

Scope: Average installed cost for a heat pump, not a gas-heater figure; plumbing and electrical work can change the quote, and heat pumps typically recover more slowly than a large gas heater if the water cools.
Source: HomeGuide, pool heater cost

Questions for your quote:

Available electrical service at the equipment pad
Whether you hold a swimming temperature or let the water cool between uses
Current plumbing and pad space along with airflow
Rough volume and your desired water temperature

This is published general US planning guidance, not a company or operator price. A licensed independent pro quotes the actual job after discussion and assessment.

Call (858) 400-4404 Get a repair or renovation quote

How it works

Using the pool service cost calculator

1. Choose one job type. Pick from cleaning, a one-time repair, resurfacing, leak detection, salt conversion, or heater installation.
2. Check the range and scope. Pay attention to the unit, what the source covers, and what it excludes. Resurfacing is measured by interior finish area, not gallons.
3. Copy the quote questions. Your pool's condition, equipment, and measured area should be discussed directly with the company rather than plugged into a website formula.
4. Request a real quote. Provide those details to a licensed pro so they can price the work after discussion and assessment.

FAQ

Pool service cost calculator, common questions

Why isn't this a quote for my pool?

No page can view your equipment, finish area, access points, or what actually broke. These are published national planning ranges. Splash Pool SD does not treat them as company rates. A real number comes only after a licensed independent pro speaks with you and evaluates the job.

Why are the categories kept separate?

The sources price distinct jobs. Pump repair is not a new heater. Leak detection is not resurfacing. Compare those separate scopes, then ask the company to quote the combined work you actually need.

How do I compare what's included?

Use the scope on each result. Ask whether monthly cleaning includes chemicals. Resurfacing is per square foot of interior finish and the published range excludes refill. Leak detection sometimes includes a minor patch and is not a full leak repair. Ask the provider to put inclusions and exclusions in writing before you compare bids.

How can I get an actual quote?

Use the questions on the result as a checklist. For repair or renovation matching, call (858) 400-4404 or use the quote form. Splash Pool SD matches homeowners with licensed independent pros and does not perform the physical work. For cleaning, ask your chosen provider for a written scope.

Covering San Diego County

Get a repair or renovation quote

Splash Pool SD matches homeowners with licensed independent pros and does not perform the physical work. Call (858) 400-4404 for repair or renovation matching. For cleaning, ask your chosen provider for a written scope.

(858) 400-4404 Request a quote